miércoles, 29 de mayo de 2013

John McGuinness rides the Mugen Shinden Ni


A thinly veiled entry in the Isle of Man’s electric TT Zero race, the new Mugen Shinden Ni has just arrived on the Isle of Man. No sooner had it, than 19-time TT winner John McGuinness started turning laps at the local Jurby circuit. Here’s what he had to say.


“It looks like a brand new bike,” explains McGuinness. “Although it does have a few parts in common with last year’s. The new bike is lighter and has greater speed and agility. It’s more comfortable to ride, because they have changed the shape of the tank. There is a rear brake, but I’ve never used it. And then no gears: you just jump on and go as fast as you can. Basically, it is a scooter. A frighteningly quick scooter, mind!”



Both Mugen and MotoCzysz are targeting an average speed in excess of 110mph this year. That will put the battery bikes on par with the TT’s 650 twin class and is a significant advancement over last year’s race, where the Mugen recorded an average speed of 102.2mph in its 2nd place finish.


Over last year’s bike, the Shinden Ni is said to weigh 44lbs less, thanks to a new frame, swingarm, motor and, of course, battery pack. Those batteries remain the greatest limiting factor in the TT Zero. The 37.7-mile lap is as much a test of range as it is of power.



“The goal was to increase the power and make it available for more time,” explains Colin Whittamore, the GM of Mugen Europe. “We need more power and range if we’re going to reach the average lap speed of 110 miles per hour. This year we are also able to give more options to John, while last year they only had one. We told him: ‘If at this point of the race, you still have a certain amount of remaining battery charge, press this button.’ However, we have not yet decided our strategy for 2013.”



Asked if the Shinden hinted at future plans for a production bike from either Honda or Mugen, Whittamore responded, “There is no grand plan to get to sell a bike for either road or racing use. What we have here is merely a prototype. However, we are quite sure that this is the most expensive bike in the paddock.”


The post John McGuinness rides the Mugen Shinden Ni appeared first on RideApart.







via RideApart http://rideapart.com/2013/05/john-mcguinness-rides-the-mugen-shinden-ni/?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+HellForLeather+%28Hell+For+Leather%29

KTM 690 Duke Cup: a naked racer


The KTM 690 Duke Cup is a kit intended to convert a fun road bike to a realistic track weapon. In addition to the expected bodywork, it includes aluminum handguards to shield the levers and rearsets to increase ground clearance.



The kit includes plastic bodywork for: front spoiler, number plate background, chain drop guard and a bellypan. Adding the rearsets and handguards to increase crash worthiness. The bike seen here is also fitted with a crash cage and performance exhaust system.



The post KTM 690 Duke Cup: a naked racer appeared first on RideApart.







via RideApart http://rideapart.com/2013/05/ktm-690-duke-cup-a-naked-racer/?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+HellForLeather+%28Hell+For+Leather%29

martes, 28 de mayo de 2013

Why I ride a slow, uncomfortable, unreliable, noisy motorcycle


If you ever saw my motorcycle you’d think I was a complete idiot. You would ask yourself why on earth would someone ride something with 17-inch ape hanger handlebars, a massive sissy bar that looks like a throwback from an early 1970s biker film bolted to a motorcycle that has the technical sophistication of a very large lawn mower?


Photo: Anne Watson


It’s also noisy. Very noisy. Under hard acceleration it sounds like a moose bellowing as if someone had just slammed its testicles in a car door.


I honestly didn’t want it to be like that. But when my bike left the Harley-Davidson factory its stock engine set-up meant it ran so lean that the heat from the air-cooled motor made it almost impossible to ride here in California when temperatures climb into the 80s.


So I changed out the stock pipes. But then I was told I needed a new air filter and a re-map of the engine. All of that didn’t make my motorcycle much faster but it did suddenly come alive. And it sort of cooled down.


Its exhaust can be truly obnoxious which is why I ride with a light hand on the throttle in built-up areas. When there’s nobody about and just me and an open road I revert to the moose bellowing. But after a while it can make even my head hurt and then I wonder about my sanity and why I ride this damned bike.


I have read and re-read the countless things I could do to make its v-twin 96-ci engine faster and perform better. But I’m not convinced. I look at my bike and I am not sure that it is either.


At idle it shakes like a carnival ride and if I look down for too long the vibrations make my vision go blurry and then my hands go numb.


I hate the fact every single bolt and fastening has to be glued in place to stop them falling out. Before each ride I always have to check it over so it doesn’t leave me standing at an intersection with nothing more than the handlebars, a seat and a pile of parts.


The ape hanger bars were an after thought. I’d seen some of the Mexican low rider motorcycles in my neighborhood with mean looking dudes using them on their bikes.


I’ll admit they look preposterous (not the Mexican dudes) and I have lost count of the number of people who ask me precisely why I have them. I can’t give them a satisfactory answer. I just like ape hangers.


I did have an idea once of how I wanted my bike to look. I thought a sort of 1950s bobber style with some classic retro parts. But it’s become a bit of a mish mash and not quite how I envisaged it would turn out.



I paid good money for a special order 32-inch sissy bar for the back of my bike. Some people have said looks like I am riding a remote control motorcycle or others have asked if I ever receive radio wave interference through it. It serves absolutely no purpose, rattles like hell all the time and makes getting on or off the bike a contortionist’s act. But I like the way it looks.


In a moment of madness I once took the front fender off. But this resulted in the bike and my face being sand blasted from road grit. Even an artfully tied bandana between the forks when it rained meant all that happened was a jet of water was thrown off the tire and straight up my nose. In a matter of hours the fender went back on.


I also kept the stock solo seat too. But if I were honest it would be more comfortable sitting on a piece of cardboard. There’s no back support and I feel I can ride over cigarette butts and tell you if they’re filtered or unfiltered. But I like the feedback from the road that it gives me even if on long rides it kills my back.


There’s an ugly gash on my bike’s left peg where I thought I could easily squeeze between a parked car and a wall to ride down a back alley. And there’s a dent the size of a dime on the front of the gas tank, caused by a rock flung out of a truck tire on the freeway. I’ve left it as a reminder of what that would have done to my face if the rock had hit me.


The factory fit rear brake light, which some say looks like a limp chrome dick, works intermittently. The rudimentary fuel gauge that may well have come off a 1960’s child’s pedal car some times pops out of the tank when I least expect it.


And I constantly have to check the primary plug for leaks as I over torqued it once during an oil change and stripped the thread. The chopper-style headlight I bought for it and which replaced the perfectly serviceable original light, is about as useful as a candle in the wind. But in daylight and probably only to my eyes it looks good.


Of course there are far better bikes out there I could have bought. There are many that are faster and nicer looking that probably have more engineering sophistication in their front brake lever than my entire motorcycle.



But herein lies the problem. For everything that irritates me about my bike it always without fail makes me smile every single time I get on it.


I have ridden it through empty deserts, up mountains and across, around and through nine states covering more than 8,000 miles in the process. I have nearly been taken out by an 18-wheeler on a downhill mountain pass and I once ran over a rattlesnake with it in the Mojave Desert.


My bike has taken me though some astonishing U.S. backwater towns in 100 plus degree heat and then a few hours later up into the mountains and over snow covered roads.


And, just like legendary Western lawman Wyatt Earp, I too once rode into Tombstone, Arizona, on it.


It’s my motorcycle. It drives me nuts at times but it’s been through a lot with me and has now become a part of my life. And for that reason alone I will never, ever sell it.


The post Why I ride a slow, uncomfortable, unreliable, noisy motorcycle appeared first on RideApart.







via RideApart http://rideapart.com/2013/05/why-i-ride-a-slow-uncomfortable-unreliable-noisy-motorcycle/?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+HellForLeather+%28Hell+For+Leather%29

RideApart Review: Moto Guzzi Stelvio 1200 NTX


Parent company Piaggio didn’t make a bit deal out of it, but it totally re-designed the Stelvio in 2009 with a new motor and new frame. Is the Moto Guzzi Stelvio 1200 NTX now a worthy alternative to the class-defining GS?



What’s New:


Take the old Stelvio and change the torque curve from 80lb/ft peaking at 6,400rpm to 83lb/ft at 5,800rpm, add a narrower 4.25×17″ rear rim (capable of accepting enduro rubber), an aluminum sump guard, brush guards, aluminum luggage, engine bars and auxiliary lights and you have the NTX. Add all that to the 1,151cc air-cooled 90° twin making 105bhp, the 8.5-gallon tank capacity and a 598lbs kerb weight.


The 150-section rear, spec’d to enable the fitment of knobbies, but here wearing road-biased Pirelli Scorpions, rolls over on its side in a manner alien to most modern bikes and their too-wide rubber. 1st gear is short enough and the torque strong enough low down — 85lb/ft at just 5,800rpm — that you’re off the clutch and on the power as soon as you’re past that 20mph apex. That new motor really takes off between 6 and 8,000rpm though. Cross that 6,000rpm barrier and the 1,151cc air/oil-cooled twin adopts a much more menacing, deeper exhaust note, delivering 105bhp.


The NTX decreases rear wheel width to 4.25-inches to make selection of dirt rubber easier and receives a host of additional accessories as standard. Switchable antilock brakes, traction control, panniers, crash bars, spotlights, wire wheels, an extra-large windshield and additional wind deflectors on the side, plus bark busters. All that boosts the distance capability and comfort of the bike while making it seriously rugged. You get the feeling you could throw it down in one of the hairpins, pick it up, and ride it a couple hundred miles back to Mandello with only an apology to show for your trouble. In matte black — the only color available on the NTX — the whole thing feels ready for the Zombie Apocalypse. It just needs “Medusa” decals on the panniers.



What’s Good:

This Moto Guzzi is invariably compared to that BMW. You know the one. And not without reason, not only are the specs extremely similar — air-cooled longitudinal twins (the BMW is now partially water cooled), single-sided shaft drive swingarms, single-plate clutches — but the Italian bike was created specifically to benefit and conquest sales from the German. Some things about the GS are better — it’s nearly 100lbs lighter than the NTX to start, although it admittedly comes with fewer options — but there’s two big differences that right here, heading down a wet alpine pass, really make the Guzzi shine:


Conventional forks and traction control. On the Stevio, applying the front brakes compresses the front suspension, steepening its angle and making steering both faster and more confidence inspiring as weight transitions to the front wheel and the contact patch grows. Say what you will about the benefits of BMW’s dive-free Telelever, but when you want front end feel, there’s nothing better than a traditional set of telescopic forks.


What’s Bad:

Extremely high weight and limited ground clearance mean you really don’t want to take it off-road.



The Verdict:

A characterful, fun, practical Italian alternative to the reigning BMW R1200GS. If you want an ADV bikes a a versatile tourer, look no further. If you actually plan to head more off-road than a fire road, you’re going to want something lighter, like the KTM or one of the mid-capacity ADV bikes like a Suzuki V-Strom 650.


RideApart Rating: 6/10


The post RideApart Review: Moto Guzzi Stelvio 1200 NTX appeared first on RideApart.







via RideApart http://rideapart.com/2013/05/rideapart-review-moto-guzzi-stelvio-1200-ntx/?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+HellForLeather+%28Hell+For+Leather%29

sábado, 25 de mayo de 2013

No Lane Splitting For Nevada


We’ve been following the progress of Nevada’s lane splitting bill, AB236, very closely. Despite passing with the Nevada Assembly with overwhelming support, the bill was amended in the Senate Transportation Committee to allow lane splitting only in stopped traffic, at no more than 10 MPH. Today, the bill was voted on by the full Senate and lost by a landslide, 16 to 5.


This is extremely disappointing in many ways. We’d heard from one of our sources that the bill was amended to ensure it would make it through, but that didn’t happen. Early on, the support for AB236 looked like this could potentially be a template for other states to follow. Unfortunately, California continues to stand alone in the US, as the only state to allow lane splitting. Of course, lane splitting / filtering / lane sharing is legal, accepted and expected in much of the rest of the world where motorcycles are much more common as daily transportation.


The amended bill would have allowed splitting in such limited form it’s almost unbelievable that it didn’t pass:


Sec. 3. NRS 486.351 is hereby amended to read as follows:


486.351 1. Except as otherwise provided in this section, a person:


(a) Between moving or stationary vehicles occupying adjacent traffic lanes.


(b) Abreast of or overtake or pass another vehicle within the same traffic lane.


2. The provisions of subsection 1 do not apply to a police officer in the performance of his or her duty.


3. A person may drive a motorcycle between stationary vehicles occupying adjacent traffic lanes and traveling in the same direction as the motorcycle provided that:


(a) The person drives in a manner that is reasonable and proper, having due regard for the traffic, surface and width of the highway, the weather and other highway conditions; and


(b) The motorcycle, while driving between such vehicles does not travel at a speed which is more than 10 miles per hour.


Here’s the video of the vote:



This article first appeared on Lane Splitting Is Legal and is reprinted here with permission. Follow LSiL to keep up to date on all lane splitting news.


The post No Lane Splitting For Nevada appeared first on RideApart.







via RideApart http://rideapart.com/2013/05/no-lanesplitting-for-nevada/?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+HellForLeather+%28Hell+For+Leather%29

viernes, 24 de mayo de 2013

BMW Concept Ninety:


“The BMW Concept Ninety resurrects this spirit of the emotionally charged superbike”, says BMW of this new concept bike built by Roland Sands. Could it point the way for a future production model?



“This is a modern reiteration of the traditional essence of the motorcycle: the harmonious unison of man and machine,” continues BMW. “It’s a sporty boxer with a battery of sophisticated details. Its basic proportions clearly take their cue from the forebear that inspired this concept: the fairing, tank, seat and tail instantly signal its family bond with the BMW R 90 S. The BMW Concept Ninety also picks up on the demarcation of the bike’s proportions that was a hallmark of the time. The upper ergonomic and aerodynamic bodywork is visually separated from the black engine and chassis. The bodywork is hand crafted from aluminium. Its brushed areas can be seen in the tinted areas of the front fairing and tank, as well as at the tail. The rich orange shade of the BMW Concept Ninety is also a nod to the legendary Daytona Orange paintwork of the BMW R 90 S.”


“Today BMW motorcycles stand for perfection and function. That is what we have worked hard to achieve and something we are very proud of,” explains Ola Stenegard, BMW Motorrad’s head of design. “But we want more than that. With the BMW Concept Ninety we want to show how reduced and pure an emotional BMW motorcycle can be.”


“The BMW Concept Ninety delivers a very sporty interpretation of the front fairing. But whereas halogen was technically cutting-edge in the BMW R 90 S era, contemporary LED elements light up the face of the BMW Concept Ninety, honouring its ancestor with a round headlamp design. Seamlessly mounted behind it, the dynamically shaped tank ensures an optimal connection between rider and machine. Further along, the tank and seat melt harmoniously into each other. A steadily ascending line from the handlebars to the tail creates a slight wedge shape, lending the BMW Concept Ninety an almost ready to attack stance when viewed from the side – like a sprinter about to explode into action. Below the bodywork sits the air-cooled flat-twin boxer engine. Entirely in black with contrast cut details this section of the bike symbolises concerted power, precision and performance. The mechanics and technology as a whole are purposely rendered visible and reflect a keen attention to detail.”


The post BMW Concept Ninety: appeared first on RideApart.







via RideApart http://rideapart.com/2013/05/bmw-concept-ninety/?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+HellForLeather+%28Hell+For+Leather%29

20 Years Of Monster


Ducati chose the Quail Motorcycle Gathering to mark the 20th anniversary of its legendary Monster bike estimating more than 150,000 have been sold since it was first introduced in 1993.



There was a special area in the Ducati display at Carmel, CA, with three versions of the Monster motorcycle on show – a 1999 streamline special, a 1995 custom tracker and a 2013 Monster.


On hand was former Ducati Monster program manager Miguel Galluzzi and now Director of the Piaggio Group’s Advanced Research & Design Center, based in Pasadena, California. He gave some insight into the Monster’s design and development and explained how there was just himself and Fabio Montanari working in secret on the Monster at the Ducati’s Bologna factory, in Italy.


“We were hidden away in secret and nobody at the time knew what we were working on,” said Galluzzi. “Fabio was an expert at working with aluminum and we felt we were onto something really special when he and I put it altogether and saw the finished Monster for the very first time.”



Galluzzi spent some time looking at AVA’s 250 Swift that was making its world premier at the Quail Motorcycle Gathering. “You know we have a big gap in our range at the moment with nothing in the smaller capacity sector. The problem here in the U.S. is the average age of buyers is a lot higher than in Europe and they want bigger motorcycles. But maybe we should be looking at smaller bikes for the younger market too.”


The post 20 Years Of Monster appeared first on RideApart.







via RideApart http://rideapart.com/2013/05/20-years-of-monster/?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+HellForLeather+%28Hell+For+Leather%29